Interaction of graphene,MnOx, and Ca2+ for enhanced biomimetic, ‘bubble-free’ oxygen evolution reaction at mild pH

Water electrolysis powered by renewable electricity will likely be critical to a future hydrogen economy. However, the typical use of strongly acidic or alkaline electrolytes necessitates the use of expensive materials, while bubbles add to capital and operational costs, due to blocking of the electrode surface and the necessary use of pumps and gas-liquid separators. Here ‘bubble-free’ oxygen evolution at mild pH is carried out using an electrocatalyst that mimics photosystem II (PSII). The bubble-free electrode includes a gas-extracting Gore-Tex® membrane. Edge-functionalised graphene (EFG) is included to mimic the metal-binding local protein environment, and the tyrosine residue, in the oxygen evolving complex (OEC) of PSII, while MnO_x and Ca²⁺ are incorporated to mimic the Mn₄CaO₅ cluster. Interaction between EFG, MnO_x, and Ca²⁺ results in a significant, 130 mV fall in the overpotential required to drive electrocatalytic oxygen evolution at 10 mA cm⁻², compared to the electrode without these biomimetic components.     

Quantifying the limits of CAR T-cell delivery in mice and men

CAR (Chimeric Antigen Receptor) T cells have demonstrated clinical success for the treatment of multiple lymphomas and leukaemias, but not for various solid tumours, despite promising data from murine models. Lower effective CAR T-cell delivery rates to human solid tumours compared to haematological malignancies in humans and solid tumours in mice might partially explain these divergent outcomes. We used anatomical and physiological data for human and rodent circulatory systems to calculate the typical perfusion of healthy and tumour tissues, and estimated the upper limits of immune cell delivery rates across different organs, tumour types and species. Estimated maximum delivery rates were up to 10 000-fold greater in mice than humans yet reported CAR T-cell doses are typically only 10–100-fold lower in mice, suggesting that the effective delivery rates of CAR T cells into tumours in clinical trials are far lower than in corresponding mouse models. Estimated delivery rates were found to be consistent with published positron emission tomography data. Results suggest that higher effective human doses may be needed to drive efficacy comparable to mouse solid tumour models, and that lower doses should be tested in mice. We posit that quantitation of species and organ-specific delivery and homing of engineered T cells will be key to unlocking their potential for solid tumours.     

干熄焦锅炉炉管失效机理分析

通过对干熄焦锅炉炉管及腐蚀产物开展系统研究，提出炉管失效原因为氧化/硫腐蚀＋高温粉尘冲刷。长寿命炉管仅耐磨层发生了较为严重的氧化及硫腐蚀，而近基体层发生了轻微氧化及硫腐蚀，基体只发生了轻微氧化；短寿命炉管耐磨层、近基体层以及基体裂纹内均发生了较为严重的氧化及硫腐蚀，且存在珠光体球化、内表面产生全脱碳层等缺陷。推测短寿命炉管存在超温现象，而超温可加剧氧化及硫腐蚀反应。此外，短寿命炉管遭受了较为严重的高温粉尘冲刷，不仅可造成炉管减薄，还会导致炉管表面温度升高。因此，减少循环气体中粉尘量尤其是大颗粒，可有效减弱冲刷以及控制炉管表面温度，是提高炉管使用寿命的关键。     

含水率对砂岩动态拉伸强度的影响

工程中的岩石具有不同的含水性，研究不同含水率岩石动态力学性质的变化规律，对岩石工程的设计和建设具有很强的指导意义。为研究不同含水率对砂岩动态拉伸强度的影响，利用霍普金森压杆（SHPB）试验装置对不同含水率试样进行了一系列动态巴西劈裂试验，研究了不同含水率砂岩在不同加载率条件下的动态拉伸强度变化规律。试验结果表明：岩石的动态拉伸强度随着加载率的增加而增加，其率相关性与含水率有关，饱和试样的率相关性较强，而干燥岩石的动态强度对加载率的变化不敏感。当加载率较低时，岩石的拉伸强度随着含水率的增加而降低；当加载率较高时，由于水的Stefan效应，水对岩石裂纹产生抗力，阻碍其扩展，导致岩石强度增加，饱和试样的动态拉伸强度出现高于非饱和试样强度的现象。     

钢管套筒灌浆连接轴向受拉性能模拟试验研究

为研究钢管套筒灌浆连接轴向受拉破坏过程及破坏机理，试验中设计了16组48个钢管套筒灌浆连接试件，试件采用钢板代替圆钢管，并进行静载试验。分析了灌浆料裂缝扩展过程、荷载-相对位移曲线，并对抗剪键高距比、灌浆料厚度、侧向力等因素对破坏过程及承载力的影响进行分析。结果表明：对于不设置抗剪键的套筒灌浆连接试件，斜裂缝随机产生，裂缝分布不均匀；对于设置抗剪键的套筒灌浆连接试件，裂缝首先出现在底部抗剪键位置处，与水平方向夹角约为30°，随后在中部和上部抗剪键位置处分别出现斜裂缝。由于每个抗剪键上荷载分担并不均匀，与抗剪键接触的灌浆料逐渐达到极限压应力，达到极限状态时，承载力全部由抗剪键间的机械咬合力承担，在连接承载力中，可忽略摩擦力和胶结力作用。随着抗剪键高距比h/s增大，各试件初始剪切刚度相差不大，承载力增大，但增幅逐渐减小，建议抗剪键高距比0.06g/s>0.3，同时需要满足灌浆料灌注的施工要求。     

考虑节点过载的碳排放空间关联系统级联失效模型

为提高突发事件级联失效对现实碳排放关联系统破坏程度的评估可信性，在传统复杂网络的"负载-容量"级联失效模型基础上，考虑个体成员对负载的冗余能力，提出一种过载失效概率，构建了考虑节点过载状态的级联失效模型，并基于节点特性提出了6种过载节点负载分配策略。仿真结果表明：在过载节点负载分配策略中，综合分配策略整体上较优，能够有效控制级联失效的规模，增加网络鲁棒性；在一定范围内提升过载参数有助于降低级联失效的影响，但提升到一定程度时改善效果不明显；在不同负载分配策略下，剩余系数存在一个最优值，容量可调参数存在最优区间，可以使碳排放关联网络保持较好鲁棒性的同时，花费较小的构建成本，其中紧密度分配策略对应的网络构建成本较高。     

Synthesis conditions effect on the of photocatalytic properties of MnWO4 for hydrogen production by water splitting

This work aims to study the synthesis conditions effect on the photocatalytic properties of manganese tungstate (MnWO₄) for H₂ production by the water splitting reaction under visible light irradiation. This is achieved by relating the materials characterization and photocatalytic evaluation of MnWO₄ at different synthesis conditions. MnWO₄ was synthesized through a precipitation reaction between Mn²⁺ and (WO₄)^2- ionic species, while adding oleic acid (OA) as surfactant at two concentrations (0.1% and 1% V) and using three different stirring methods: magnetic stirring (AM), ultrasound (US) and high-shear stirring (UT). Characterization was carried out by TGA, XRD, BET surface area, UV–Vis spectroscopy and FESEM. XRD patterns confirm the wolframite structure of MnWO₄. BET surface area increased by using UT stirring. UV–Vis spectroscopy results revealed indirect transition Eg values of ≈2 eV, favorable for the MnWO₄ photoactivation under visible light irradiation. During the photocatalytic evaluation, sample 1%-UT produced the highest H₂ amount among all samples with a value of 72 μmolH₂g⁻¹, which was far higher compared to WO₃, which was taken as a reference photocatalyst.     

Strain‐rate‐dependent mechanical properties of polypropylene separator for lithium‐ion batteries

The mechanical integrity of battery separators is critical for battery safety and durability. A comprehensive study of strain‐rate‐dependent tensile and puncture properties of a polypropylene lithium‐ion battery separator is presented here with a new model. Due to anisotropy of the polymeric membrane, tensile testing was conducted for different directions. Results showed that tensile strength and elastic modulus were increased 1000% and 500%, respectively, for different directions. It was also demonstrated that tensile strength changed 10 to 25% with strain rate (1.67 × 10^?4 to 1.67 × 10^?1 s^?1) for different directions. An equation was obtained for the first time for flow stress versus strain rate at varied tensile directions with respect to machine direction. Moreover, puncture testing was performed and it was shown that puncture strength was increased 140% with increasing strain rate from 0.25 to 250 mm min^?1. Two failure modes were also observed in puncture samples. Finally, Eyring's model was used to calculate activation enthalpy of the porous polypropylene separator. © 2020 Society of Chemical Industry     

从几个典型案例谈燃油系统管理

基于典型故障案例的阐述和故障原因分析，归纳总结了船舶柴油机燃油系统在日常使用和管理中应注意的问题，可为船舶操作人员和管理人员提供参考。     

Investigation of fracture behavior of cement-bonded corundum castables using wedge splitting test and digital image correlation method

To investigate the fracture behavior of cement-bonded corundum castables, various cement contents and pre-treating temperatures have been comparatively studied using the wedge splitting method and the digital image correlation technique. The results show that the microstructure enhances the mechanical properties, so the fracture energy and the maximum load as well as the fracture modes are affected correspondingly. The castables demonstrate the highest fracture energy and maximum load at 1600 °C with cement content of 10 wt% due to an appropriate amount of CA6. At the temperatures of 110 and 1100 °C, the crack propagation within the matrix and along the interface are dominated whereas within the aggregates significantly increased at 1600 °C, leading to the brittleness of materials. However, increasing the cement content can reduce their brittleness, caused by the maximum strain in thex-direction, largest length of the main crack, and high ratio of crack propagation in the matrix.